Overview
High efficiency and low consumption,Long service life,No rolling bearings and screws,Adjustable fineness,Easy maintenance
Learn More About European grinding mill
According to customer needs, we provide flexible customization and transformation services; the equipment design focuses on environmental protection and energy saving, reducing maintenance costs and lubricant costs; an intelligent microcomputer control system is optional to achieve automated intelligent control; the equipment has stable performance and strong durability, reaching the world's advanced level; a number of patented technologies are used, such as centralized lubrication devices and bearing seal locking devices, to improve equipment performance and service life.
Working Principle
Prepare the raw materials with humidity below 8% and fineness within 8 levels and send them to the feed port of the mill. The raw materials are ground by the roller and other parts in the grinding chamber inside the mill. The bearing parts such as the roller are lubricated by the patented centralized lubrication device to ensure smooth operation of the equipment. According to the demand for finished products, the fineness of the finished products is controlled between 80-350 mesh by adjusting the equipment parameters. The finished products after grinding are collected through the discharge port and prepared for the next step of processing. The finished products are selected by a high-precision new powder selector to ensure uniform fineness and improve product quality. The air volume is adjusted by an efficient and energy-saving fan to control the fineness and output of the finished products. The air inlet is equipped with a petal-type air inlet to facilitate air volume adjustment. The roller bearing chamber adopts a multi-stage labyrinth overlapping forced sealing structure to prevent dust from entering, protect the equipment and extend the bearing life. Regular inspection and maintenance, especially the sealing and lubrication system of the roller bearing, ensure long-term and stable operation of the equipment. If the equipment is equipped with an ultra-clean emission system, it can ensure that emissions meet environmental protection standards and reduce the impact on the environment. If equipped with an intelligent microcomputer control system (PLC/DCS), it can achieve automated intelligent control of the equipment and improve operational efficiency and safety.
Specifications - Technical Data
规格型号Model | MTW-110 | MTW-138 | MTW-175 | MTW-200 | MTW-220 |
---|
磨辊数量(个)Roller Number | 4 | 4 | 4-5 | 4-5 | 4-5 |
磨辊直径×高度(mm)Roller Inner DiameterxHeight | φ360×190 | φ460×240 | φ520×280 | φ550×310 | φ640×320 |
磨环内径×高度(mm)Ring Diameter×Height | φ1080×190 | φ1380×240 | φ1750×280 | φ2000×310 | φ220×320 |
主机转速(rmin)Rotate speed | 120 | 96 | 75 | 72 | 65 |
最大进料粒度(mm)Max Feed sze | ≤30 | ≤35 | ≤40 | ≤45 | ≤50 |
成品可调粒度Finished Size | 80-350目(0.177-0.044mm) |
产量(th)Capacity | 3-10 | 6-12 | 10-35 | 13-40 | 18-50 |
全套外形尺寸(米/m)Outline | 72×6.2×8 | 9.8×8.2×9.8 | 13.5×8.5×8.6 | 11.8×11.3×10.6 | 14.5×12×11 |
主机电机Main Motor | 功率(kw)Power | 55 | 90 | 160 | 250 | 280-315 |
选粉机调速电机SelectorMotor | 功率(kw)Power | 5.5-11 | 15-18.5 | 30-37 | 45 | 75-90 |
风机电机BlowerMotor | 功率(kw)Power | 55 | 110 | 200 | 250 | 280-315 |
注明:以上产量以方解石为标准,原料湿度小于6%,细度200mm,通筛率80%的标准产量.
Notice:Capadty shows above is based on caldte that has moi sture below 6%,with 80% pass rate.
Notice:
Any change of European grinding milltechnical data shall not be advised additionally.